top of page

News & Events

Herkese Açık·63 üye

Registering DLLs and ActiveX Controls on Windows 7 64-bit: A Guide to Fixing "Entry Point DllRegisterServer Not Found" Errors



Sometimes the module was loaded but the entry-point DLLRegisterserver was not found error can occur when the DLL file gets corrupted. Under this situation, you can try reinstalling the related program that includes the corrupted DLL file.




entry point dllregisterserver not found windows 7 64 bit



Regsvr32.exe was unable to find the required entry point in the module specified in the command line. This can occur if the entry points are not exported correctly from the module or if the module is not a .DLL or .OCX file.


According to the dll error, we could use the Regsvr32 tool to troubleshoot. It could be caused by Regsvr32.exe was unable to find the required entry point in the module specified in the command line. This can occur if the entry points are not exported correctly from the module or if the module is not a .DLL or .OCX file.


I'm trying to register a dll on a XP box and when I run regsvr32 interop.progname.dll I get the following error message: "interop.progname.dll was loaded, but the DllRegisterServer entry point was not found. This file can not be registered."


In computer programming, the first instructions of a program need to be executed through an entry point and the program can access to command line arguments through it. In order to start the execution of a program, the loader or operating system on your computer need to pass control to the entry point of this program.


just because as this should be run monthly as part of maintenance, please do this to see if it fixes any issue (note always backup and make restore points) : From the Keyboard press the Windows Key and the X Key and choose Powershell (Admin) OR for a DOS Command Prompt from START type cmd.exe into the start search box RIGHT-click on cmd.exe select "Run as Administrator" then Copy/Paste --> : DISM /Online /Cleanup-Image /RestoreHealth command then Enterif it finds problems then reboot. (Completed Successfully : means reboot)For more information about this command please see : -use-dism-command-line-utility-repair-windows-10-imageAfter : please Open another Admin Command Prompt and please run Copy/Paste --> SFC /SCANNOW into the Dos window or Powershell and Enter. Reboot after.The 1st goes up to Microsoft for new files if any are found to be corrupted. The 2nd will then check it self and update it self and fix issues if found.


Hi Everyone,I'm having an issue with a 2012r2 server I've inherited. It started when I was trying to figure out a problem with VSS which didn't allow to take a backup. One of the suggestions was to unregister and re-register some dlls, however, now I can't re-register some of them.I get the following error messages - which are different for different DLLs.es.dllvssapi.dllThe module "xxxxx.dll" was loaded but the entry-point DllRegisterServer was not found.Make sure that "xxxxx.dll" is a valid DLL or OCX file and then try again.eventcls.dllVssui.dllswprv.dllThe module "xxxxx.dll" was loaded but the call to DllRegisterServer failed with error code 0x80070715.For more information about this problem, search online using the error code as a search term.This obviously stops VSS from working. When I try to do a vssadmin resize for example I get an error in the Event Viewer:Volume Shadow Copy Service error: Unexpected error calling routine GetProviderMgmInterface. hr = 0x80042304, The volume shadow copy provider is not register in the system.I've done quite a bit of searching but haven't found anything that I can use.I've done chkdsk with no issues and a sfc /scannow returned that "sfc windows resource protection found corrupt files but was unable to fix some of them". I tried sfc /scannow in safe mode with the same result.Any help would be greatly appreciated!Theo


  • Read NextFix: DLLRegisterserver failed with Error 0x80070715 on Windows 10

  • Fix: DllRegisterServer failed with error code 0x80070005

  • Fix: Mshtml.dll was loaded, DllRegisterServer entry point was not found

  • Fix: Windows Failed to Start Error on Startup

  • .no-icon:beforedisplay:none; By Kevin ArrowsAugust 18, 2022 1 minute readKevin is a certified Network Engineer "@context":"http:\/\/schema.org","@type":"Article","dateCreated":"2017-11-04T19:07:30-05:00","datePublished":"2017-11-04T19:07:30-05:00","dateModified":"2022-08-18T04:39:40-05:00","headline":"Fix: DllRegisterServer Failed Error 0x8002801c","keywords":[],"url":"https:\/\/appuals.com\/fix-dllregisterserver-failed-error-0x8002801c\/","description":"The error 0x8002801c occurs when there's a problem accessing the OLE (Object Linking and Embedding) registry. Insufficient system permissions will trigger this error code when the registration of","articleSection":"Windows DLL","articleBody":"The error 0x8002801c occurs when there's a problem accessing the OLE (Object Linking and Embedding) registry. Insufficient system permissions will trigger this error code when the registration of an OCX (OLE control extension) file fails to complete. This is known to happen frequently when using regsvr32 via Command Prompt on Windows 7.\r\n\r\n\r\n\r\nIt's a common occurrence to see this error code when trying to register an OCX file from C:\\ Windows\\ system 32. Most of the time, the call to the DLLRegisterServer fails because of a permission problem and has nothing to do with the actual OCX component that you are trying to register.\r\n\r\nFortunately, the error 0x8002801c can be avoided by copying the OCX file to C:\\ Windows\\ SysWOW64 and repeating the operation with administrator privileges. If you're currently dealing with this issue, follow the step by step guide below to eliminate the error 0x8002801c and successfully register your OCX File.\r\nFixing Error 0x8002801c after OCX File Registration fail\r\n\r\n \tOpen File Explorer and navigate to your Windows partition. Next, go to Windows > Windows 32 and use the search bar to look for the OCX file.\r\nNote: In this case, the file name is MSCOMCT2.OCX, but you can replicate this procedure any OCX component that fails to register.\r\n \tCopy the OCX file to your clipboard. Next, go back to the Windows folder and open up the folder named sysWOW64. Then, simply paste the OCX file there.\r\n\r\n \tOpen the Start menu (bottom-left corner) and type \"cmd\". Then, right-click on Command Prompt and click on Run as Administrator.\r\n\r\n \tIn the Elevated Command prompt, type regsvr32 + the OCX component. In our case, the final command would be \"regsvr32 MSCOMCT2.OCX\". Upon hitting enter, you will be prompted with a message telling you the file was successfully registered.\r\n\r\n\r\nThat's it. You can use these four steps to grant proper permissions to any OCX file that is causing the 0x8002801c error code. Most of the time it will allow you to register the ActiveX component and eliminate the issue.","publisher":"@id":"#Publisher","@type":"Organization","name":"Appuals.com","logo":"@type":"ImageObject","url":"https:\/\/appuals.com\/wp-content\/uploads\/2022\/10\/apuals_new_logo_B-1.png","publishingPrinciples":"https:\/\/appuals.com\/about\/#go-to-editorial-guidelines","sameAs":["https:\/\/facebook.com\/appuals","https:\/\/twitter.com\/appuals","https:\/\/www.linkedin.com\/company\/appuals\/","https:\/\/www.youtube.com\/channel\/UCR--2QnA0vYBfqsmSI3pQ9g","https:\/\/www.crunchbase.com\/organization\/appuals"],"author":"@type":"Person","name":"Kevin Arrows","url":"https:\/\/appuals.com\/author\/admin\/","description":"Kevin is a dynamic and self-motivated information technology professional, with a Thorough knowledge of all facets pertaining to network infrastructure design, implementation and administration. Superior record of delivering simultaneous large-scale mission critical projects on time and under budget.","jobTitle":"Network Engineer","sameAs":["https:\/\/www.linkedin.com\/in\/kevin-arrows-228294216\/","https:\/\/twitter.com\/appuals?lang=en"],"knowsAbout":["Cisco, Windows, Microsoft, AWS, Azure, VMWare"],"alumniOf":"@type":"Organization","Name":"Brunel University","mainEntityOfPage":"@type":"WebPage","@id":"https:\/\/appuals.com\/fix-dllregisterserver-failed-error-0x8002801c\/","breadcrumb":"@id":"#Breadcrumb","image":"@type":"ImageObject","url":"https:\/\/cdn.appuals.com\/wp-content\/uploads\/2018\/01\/error-message.png","width":1200,"height":231 Facebook Twitter LinkedIn Reddit Share via Email Print ABOUT THE AUTHOR Kevin ArrowsNetwork Engineer (LAN/WAN) Email Twitter LinkedIn Kevin is a dynamic and self-motivated information technology professional, with a Thorough knowledge of all facets pertaining to network infrastructure design, implementation and administration. Superior record of delivering simultaneous large-scale mission critical projects on time and under budget. Load Comments Microsoft WindowsWindows High CPU Usage

  • Windows Updates

  • Windows EXE File Errors

  • Windows Virtualization

  • Windows General

  • Windows Troubleshooting

  • Windows Networking

  • Windows Display

  • Windows Setup

  • Windows Privacy

  • Windows Audio

  • Windows Blue Screen

  • Windows File Information

  • Virus & Malware Removal

  • Windows DLL

  • Programs and Apps

  • Windows Tips

  • Windows Security

  • File Conversion

Appuals Unit 21234, PO Box 7169, Dear Hay Ln, Poole, BH15 9EL, UK editor@appuals.comAbout Privacy PolicyCookie Policy Terms & Conditions Editorial Guidelines Affiliate Disclosure Contact UsCopyright 2014-2022 All Rights ReservedFacebookTwitterLinkedInYouTube Back to top button Close Search for: FacebookTwitterLinkedInYouTube.wptp z-index: 108; width:380px; background:#f5f5f5; bottom: 20px; right: -380px; position:fixed; border-radius:5px; box-shadow: 0px 25px 10px -15px rgba(0, 0, 0, 0.05); transition: 0.5s; Expert Tip


Hakkında

Welcome to the group! You can connect with other members, ge...
  • Çanakkale Okçuluk Spor Kulübü Facebook Sayfası
  • Çanakkale Okçuluk Spor Külübü Instagram Sayfası
  • Çanakkale Okçuluk Spor Kulübü LinkedIn Sayfası
bottom of page